Vega TH LINK Version 1.1 Installation Guide Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Acessórios de comunicações Vega TH LINK Version 1.1 Installation Guide. VEGA TH LINK Version 1.1 Installation Guide User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir

Resumo do Conteúdo

Página 1 - Installation Guide

Doc. Version 1.1EnglishTH LINKInstallation Guide

Página 2 - Dear Customer

Design of the TH LINKTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK10Design of the TH LINK(see figure 1)1 Ethernet interface2LE

Página 3

Design of the TH LINKTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG11Fig. 1: TH LINK (front and side view)TH LINKTrebing &

Página 4 - About this Installation Guide

Design of the TH LINKTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK12Connections and indicating elements[1] Ethernet interface:

Página 5 - For your safety

Start-up guidelineTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG13Start-up guidelineThe following steps are required for start-

Página 6

Installing the TH LINKTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK14Installing the TH LINKInstalling the TH LINKFig. 2: Insta

Página 7

Connecting to EthernetTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG15Uninstalling the TH LINK1. Remove the connected supply an

Página 8 - Performance and functioning

Connecting the power supplyTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK16Connecting the power supplyDanger! Electrical voltag

Página 9 - Ethernet network presettings

Connecting the power supplyTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG17Fig. 3: Terminal strip for power supply on the TH LI

Página 10 - Design of the TH LINK

Configuring the TH LINK in the Ethernet networkTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK18Configuring the TH LINK in the E

Página 11

Configuring the TH LINK in the Ethernet networkTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG19SettingsClick on settings and th

Página 12 - Mounting

Doc. Version 1.1 | May 2012Dear Customer,This installation Guide will help you to install the hardware. If you have any further questions, please co

Página 13 - Start-up guideline

Configuring the TH LINK in the Ethernet networkTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK20User administrationHere you can

Página 14 - Installing the TH LINK

Configuring the TH LINK in the Ethernet networkTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG21Configuration method (DHCP/Manua

Página 15 - Connecting to Ethernet

Configuring the TH LINK in the Ethernet networkTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK22Connection in a network with man

Página 16 - Connecting the power supply

Configuring the TH LINK in the Ethernet networkTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG23Setting new IP and network addre

Página 17 - Earth conductor

Configuring the TH LINK in the Ethernet networkTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK244. If you want to use a DNS serv

Página 18

TH SCOPE settingsTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG25TH SCOPE settingsClick on settings > TH SCOPE.Here you can

Página 19 - Settings

TH SCOPE settingsTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK26MeasurementThe measurement settings include among other settin

Página 20 - Operation mode

TH SCOPE settingsTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG27Apply parametersBy default all TH LINK are set as parameter re

Página 21

Connecting the PROFIBUSTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK28Connecting the PROFIBUSThe 9-pin D-Sub socket is used fo

Página 22 - Default gateway 0.0.0.0

Connecting the PROFIBUSTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG29Fig. 7: Interface connection possibilities in the PROFIB

Página 23

ContentAbout this Installation Guide ...4Intended use ...

Página 24

Connecting the PROFIBUSTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK30Bus terminating resistorsTerminations of a PROFIBUS segm

Página 25 - TH SCOPE settings

Firmware updateTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG31Firmware updateFirmware updates for the TH LINK are available fr

Página 26 - Set parameter provider

TroubleshootingTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK32Troubleshooting– Check the power supply (LED RUN must light gree

Página 27 - Parameters

TroubleshootingTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG33– Internal error or defect: Please contact the Technical Support

Página 28 - Connecting the PROFIBUS

Technical dataTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK34Technical dataElectrical dataNominal supply voltage (limit value

Página 29

General conditionsTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG35General conditionsRight to make additions or alterationsTrebi

Página 30 - Setting PROFIBUS parameters

Doc.Nr. 10003010 © Trebing & Himstedt Prozeßautomation GmbH & Co. KG

Página 31 - Firmware update

About this Installation GuideTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK4About this Installation GuidePlease read this insta

Página 32 - Troubleshooting

For your safetyTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG5Menu and keyboard commandsThe following conventions apply to menu

Página 33

For your safetyTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK6– Carefully plan the integration of the TH LINK into an existing

Página 34 - Technical data

For your safetyTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG7– High temperature differences between the storage site and insta

Página 35 - General conditions

Performance and functioningTrebing & Himstedt Prozeßautomation GmbH & Co. KG | TH LINK8Performance and functioningThe TH LINK provides acces

Página 36

Performance and functioningTH LINK | Trebing & Himstedt Prozeßautomation GmbH & Co. KG9Configuration requirements(not included in the scope

Comentários a estes Manuais

Sem comentários