Vega KV 31 Mounting brackets For tubes with ø 200…400 m Manual do Utilizador

Supplementary instructionsMounting brackets KV 31For tubes with ø 200 … 400 mmSource holder SE 31 / Vertical sensor mountingDocument ID:41406Radiation

Tube DN (in)Tube diameter(d)Total length(L1)Total length (L2)DN 200 mm (8 in) ø 219.1 mm(8.63 in)764 mm(30.08 in)798 mm (31.42 in)DN 250 mm(10 in)ø 27

Mounting brackets KV 31 • Source holder SE 113 Supplement41406-EN-120228

VEGA Grieshaber KGAm Hohenstein 11377761 SchiltachGermanyPhone +49 7836 50-0Fax +49 7836 50-201E-mail: [email protected] date:ISO 9

Contents1 Product description2 Mounting3 Supplement3.1 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83.2 Dimensions . . . .

1 Product descriptionThe KV 31 is a mounting bracket for radiation-based measuringsystems. It is suitable for pipes irradiated at right angles.Fig. 1:

The following parts belong to the scope of delivery of KV 31.12 34 65 78Fig. 2: Mounting bracket for pipes irradiated at right angles KV 31 - vertical

2 MountingTake note of the operating instructions of the corresponding sensorMINITRAC and the source holder VEGASOURCE.Take note of the following moun

761835 4 2AFig. 3: Mounting bracket with vertically mounted sensor1 Threaded rod M10 x 620 mm (M10 x 24.41 in) - 4 pcs.2 Hexagon nut M16 - 4 pcs.3 Hex

3 Shorten the threaded rods after mounting to avoid injuries.If there are gaps or intervening spaces around the installation, provideprotective fences

3 Supplement3.1 Technical dataGeneral dataTake note of the information in the operating instructions manual of the installed MINITRAC levelsensor and

3.2 DimensionsKV 31 - for vertical sensor mounting279 mm (10.98")L1L2490 mm (19.29") 258 mm (10.16")396 mm (15.59")121dFig. 5: Mou