Vega PLICSRADIO R61 Wireless indicating unit Manual do Utilizador Página 19

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 36
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 18
19
6 Setup with the integrated display and adjustment unit
PLICSRADIO D61 • Wireless indicating unit (single channel)
32626-EN-130228
Edit parameter
Save value
[->] key to select:
Menu change
Select list entry
Select editing position
[+] key:
Change value of the parameter
[ESC] key:
interrupt input
Jump to next higher menu
The sensor is adjusted via the four keys of the display and adjust-
ment module. The LC display indicates the individual menu items. The
functions of the individual keys are shown in the above illustration.
Approx. 10 minutes after the last pressing of a key, an automatic reset
tomeasuredvalueindicationistriggered.Anyvaluesnotconrmed
with [OK] will not be saved.
6.4 Setup steps
Setup is comprised mainly of the radio connection adjustment (selec-
tion radio channel and safe operation). The selection of the requested
indicationvalue,e.g.inpercent,linearizedpercentorscaledare
further adjustment options (only when using VEGA sensors).
Afterbeingswitchedon,PLICSRADIOD61rstofallcarriesouta
short self-check. The following steps are carried out:
Internal check of the electronics
indicationoftheinstrumenttype,rmwareversionaswellasthe
instrument TAG (instrument name)
Establishment of a radio connection
Indication of the selected measured value
The measured value indication displays the digital indication value,
the measurement loop designation (measurement loop TAG) and the
unit. The actual signal strength can be also displayed. By pushing the
[>] key, you move between the individual indicating windows.
1. By pushing [OK] you move from the measured value indication to
the main menu.
Adjustment system
Setup
Switch-onphase
Measured value indica-
tion/Main menu
Vista de página 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comentários a estes Manuais

Sem comentários